Oil Pan Removal - Upper

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 37228 Seal Cutter

Remove the oil level indicator tube bracket bolt.
Remove the oil level indicator tube.

Fig 1: View Of Oil Level Indicator

Courtesy of GENERAL MOTORS CORP.

Remove the two oil pan to flywheel housing bolts.

Fig 2: View Of Flywheel Housing To Upper Oil Pan Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the 24 upper oil pan bolts using a long bit 6 mm hex driver.
Separate the upper oil pan from the engine block using J 37228 .
Remove the upper oil pan.

Fig 3: View Of Upper Oil Pan

Courtesy of GENERAL MOTORS CORP.