Oil Pan Cleaning and Inspection - Lower
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil level sensor (1) and retaining clip (3).
- Clean the lower oil pan (4). Remove any sludge or other deposits.
- Clean the lower oil pan mating surface.
- Inspect the lower oil pan (4) for dents or distortion.
- Inspect the lower oil pan mating surface for damage.
- Replace the lower oil pan (4) if any damage is found.
- Install the oil level sensor (1) and retaining clip (3).