LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Manifold Crossover Removal

Intake Manifold Crossover Removal

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold crossover bolts and nuts.
  2. Remove the intake manifold crossover.
    3. Fig 1: View Of Center Intake Manifold
    GM1335931Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals