LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Fuel Injection Pump Installation

Fuel Injection Pump Installation

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the O-ring on the fuel injection pump adapter with engine oil.
  2. Install the fuel injection pump and adapter assembly.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fuel injection pump bolts.

    Tighten:  Tighten the fuel injection pump bolts to 25 N.m (18 lb ft).

    4. Fig 1: View Of Fuel Injection Pump
    GM1336114Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals