LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Exhaust Pipe Installation - Right

Exhaust Pipe Installation - Right

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Position the exhaust pipe gaskets with the tabs as shown. Failure to do so will cause improper alignment of the gaskets and result in exhaust leaks.
  1. Install the exhaust pipe with gaskets.
    2. Fig 1: View Of Right Exhaust Pipe
    GM1334842Courtesy of GENERAL MOTORS CORP.
  2. Install the exhaust outlet bracket.
  3. Install the exhaust pipe to turbocharger bolts.
  4. Install the exhaust pipe to exhaust manifold bolts in sequence.

    Tighten:  Tighten the exhaust pipe bolts to 53 N.m (39 lb ft).

    5. Fig 2: Exhaust Pipe Bolts Removal Sequence
    GM1334834Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals