LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Drive Belt Tensioner and Generator Mounting Bracket Removal

Drive Belt Tensioner and Generator Mounting Bracket Removal

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the electrical harness clip bolts.
    2. Fig 1: View Of Electrical Harness Clip Bolts
    GM1334907Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt tensioner bolt.
  3. Remove the drive belt tensioner.
    4. Fig 2: View Of Drive Belt Tensioner
    GM1334909Courtesy of GENERAL MOTORS CORP.
  4. Remove the drive belt tensioner and generator mounting bracket bolts.
  5. Remove the drive belt tensioner and generator mounting bracket.
    6. Fig 3: View Of Generator Mounting Bracket
    GM1334912Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals