LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Engine Controls - Self-Diagnostics - 3.5L) >> Diagnostic Tests >> DTC P0442: EVAP System - Leak Detected >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

This DTC tests Evaporative (EVAP) emission system for a small leak. Powertrain Control Module (PCM) monitors Fuel Tank Pressure (FTP) sensor signal to determine vacuum decay rate. At an appropriate time, PCM turns EVAP canister purge valve and EVAP canister vent valve on. This allows engine to draw a vacuum on EVAP system. At a calibrated time, or vacuum level, PCM turns EVAP canister purge valve off, sealing the system, and monitors FTP sensor input to determine EVAP system vacuum decay. If PCM detects a leak larger than calibrated amount, DTC P0442 will set.

scientia non olet · About LEMON Manuals