LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1019 (Engine Mechanical - 4.8L, 5.3L & 6.0L (Repair Instructions - 1 Of 3)) >> Repair Instructions (On-Vehicle & Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions >> Engine Sight Shield Replacement (6.0L Engine w/RPOs Y91 and Z88) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the intake manifold sight shield bolt.
  2. Remove the sight shield from the sight shield retainer.
  3. Loosen the left fuel rail cover bolts.
  4. Remove the left fuel rail cover.
  5. Remove the surge tank/heater hoses from the clip on the right fuel rail.
  6. Loosen the right fuel rail cover bolts.
  7. Remove the right fuel rail cover.
    8. Fig 1: View Of Fuel Rail Covers & Intake Manifold Sight Shield (6.0L W/RPOs Y91 & Z88)
    GM832097Courtesy of GENERAL MOTORS CORP.
  8. Remove the sight shield retainer bolts and retainer, if required.
    9. Fig 2: View Of Engine Sight Shield Retainer (6.0L W/RPOs Y91 & Z88)
    GM832095Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals