LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1019 (Engine Mechanical - 4.8L, 5.3L & 6.0L (Repair Instructions - 1 Of 3)) >> Repair Instructions (On-Vehicle & Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions >> Crankshaft Rear Oil Seal Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the torque converter locator bushing. Refer to Torque Converter Locator Bushing Replacement (5.3L Engine w/RPO HP2) .
  2. Remove the crankshaft rear oil seal (1) from the rear cover.
    3. Fig 1: View Of Crankshaft Rear Oil Seal
    GM490692Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals