LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1018 (Engine Mechanical - 4.3L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Idler Pulley Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the idler pulley bolt.
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the idler pulley.
  4. Fig 1: Drive Belt Right Idler Pulley
    GM781979Courtesy of GENERAL MOTORS CORP.