Piston and Connecting Rod Disassemble

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 24086-C Piston Pin Remover/Installer. See Special Tools and Equipment .

CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.

Remove the piston rings from the pistons.

Fig 1: Exploded View Of Piston Rings

Courtesy of GENERAL MOTORS CORP.

Press the piston pin from the connecting rod using the J 24086-C .
The piston pin has an interference fit into the connecting rod, and is full floating in the piston.

Fig 2: Pressing The Piston Pin From The Connecting Rod Using J 24086-C

Courtesy of GENERAL MOTORS CORP.

Mark, separate, and organize the parts for assembly.

Fig 3: Piston & Connecting Rod Components

Courtesy of GENERAL MOTORS CORP.