LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1018 (Engine Mechanical - 4.3L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Engine Flywheel Removal

Engine Flywheel Removal

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine flywheel bolts.
  2. Remove the engine flywheel (1), automatic transmission, if applicable.
  3. Remove the engine flywheel (2), manual transmission, if applicable.
    4. Fig 1: Engine Flywheels
    GM188129Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: If replacing the engine flywheel, manual transmission, NEW flywheel weights must be installed into the NEW engine flywheel in the same location as the old flywheel weights in the old engine flywheel.
  4. Note the position of any flywheel weights for assembly, if applicable.
    5. Fig 2: Locating Flywheel Weights (Manual Transmission)
    GM64126Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals