LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Hydraulic Brake System) >> Repair Instructions >> Brake Pedal Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, 2004 Chevrolet Cab & Chassis Silverado, and 2003 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pushrod retaining clip (4).
  2. Remove the stop lamp switch (2) and the pushrod (3) from the brake pedal stud (1).
    3. Fig 1: View Of Pedal Stud, Stop Lamp Switch, Pushrod & Retaining Clip
    GM344194Courtesy of GENERAL MOTORS CORP.
  3. Remove the nut from the brake pedal bolt.
  4. Remove the brake pedal bolt.
    5. Fig 2: Removing Brake Pedal Bolt
    GM375693Courtesy of GENERAL MOTORS CORP.
  5. Remove the brake pedal.
scientia non olet · About LEMON Manuals