LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Front Drive Axle) >> Repair Instructions >> Vent Hose Connector Replacement - Front Drive Axle >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the vent hose from the vent hose connector.
    3. Fig 1: View Of Vent Hose To Differential Carrier Assembly
    GM834272Courtesy of GENERAL MOTORS CORP.
  3. Remove the vent hose connector from the differential carrier assembly.
    4. Fig 2: View Of Vent Hose Connector
    GM847064Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals