LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Front Drive Axle) >> Repair Instructions >> Lubricant Replacement - Front Drive Axle >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the front differential carrier shield, if equipped. Refer to Shield Replacement .
  3. Clean the area around the front axle fill plug and the drain plug.
  4. Remove the fill plug.
  5. Remove the drain plug.
  6. Fig 1: Front Drive Axle Lubricant Drain Plug
    GM834237Courtesy of GENERAL MOTORS CORP.
  7. Drain the fluid from the front differential carrier assembly.