Inner Axle Seal and/or Bearing Replacement - Front Drive Axle: Notes

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 8092 Universal Driver Handle - 3/4 in - 10. See Special Tools and Equipment .
J 2619-01 Slide Hammer. See Special Tools and Equipment .
J 29369-1 Bushing and Bearing Remover. See Special Tools and Equipment .
J 29369-2 Bushing and Bearing Remover (2-3 inch). See Special Tools and Equipment .
J 36609 Axle Tube Bearing Installer. See Special Tools and Equipment .
J 45225 Axle Seal Installer. See Special Tools and Equipment .