Differential Carrier Assembly - Disassemble (8.25 Inch Axles): Notes

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 22912-01 Split-Plate Bearing Puller. See Special Tools and Equipment .
J 2619-01 Slide Hammer. See Special Tools and Equipment .
J 29369-1 Bushing and Bearing Remover. See Special Tools and Equipment .
J 33791 Carrier Bushing Remover/Installer. See Special Tools and Equipment .
J 34011 Pilot Bearing Remover. See Special Tools and Equipment .
J 36598 Holding Fixture. See Special Tools and Equipment .
J 36599-A Side Bearing Nut Wrench. See Special Tools and Equipment .
J 36616 Axle Mount Bushing Remover/Installer. See Special Tools and Equipment .
J 45765 Pinion Remover. See Special Tools and Equipment .
J-45858 Front Axle Bearing Race Remover/Installer - 8.25 Inch Axle. See Special Tools and Equipment .
J 8614-01 Flange and Pulley Holding Tool. See Special Tools and Equipment .