Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the bracket to the vehicle.
Install the bolt to the frame and the bracket.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the washers and the nuts to the bracket.
Tighten: Tighten the nuts to 90 N.m (70 lb ft).

Fig 1: Bracket, Bolts, Nuts & Washers (15 LD Series)

Courtesy of GENERAL MOTORS CORP.

Install the differential carrier assembly. Refer to Differential Carrier Assembly Replacement .
Lower the vehicle.