LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Front Drive Axle) >> Repair Instructions >> Bracket Replacement (15 HD, 25, 35 Series) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bracket to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the washers and the nuts to the bracket.

    Tighten:  Tighten the bracket to frame nuts to 90 N.m (67 lb ft).

    3. Fig 1: Bracket, Nuts & Washers (15 HD, 25, 35 Series)
    GM365933Courtesy of GENERAL MOTORS CORP.
  3. Install the air conditioning compressor -4.8 L, 5.3 L and 6.0 L engines. Refer to Compressor Replacement (L18) orCompressor Replacement (LB7) or Compressor Replacement (LR4, LM7, and LQ4) in HVAC Systems with A/C-Manual.
  4. Install the differential carrier assembly. Refer to Differential Carrier Assembly Replacement .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals