LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Frame & Underbody) >> Repair Instructions >> Transmission Support Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Support the transmission with a transmission jack.
  3. Remove the nut retaining the transmission mount to the transmission support.
    4. Fig 1: Identifying Transmission Mount Nuts
    GM647997Courtesy of GENERAL MOTORS CORP.
  4. Raise the rear of the transmission.
  5. Remove the bolts and the nuts retaining the transmission support to the frame. (15 series)
    6. Fig 2: View Of Transmission Crossmember
    GM702036Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts and the nuts retaining the transmission support to the frame. (25/35 series)
  7. Remove the transmission support from the frame.
    8. Fig 3: Identifying Crossmember & Bolts
    GM652595Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals