LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Frame & Underbody) >> Repair Instructions >> Trailer Hitch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the hitch platform to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the platform hitch bolts to the frame rails and the rear bumper.

    Tighten:  Tighten the bolts to 125 N.m (92 lb ft).

    3. Fig 1: Installing Hitch Platform
    GM349060Courtesy of GENERAL MOTORS CORP.
  3. Connect the trailer wiring harness.
    4. Fig 2: Connecting Trailer Wiring Harness
    GM399253Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals