LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Frame & Underbody) >> Repair Instructions >> Tow Hook Replacement (25/35 Series) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tow hook to the frame rail.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts to the tow hook through the frame rail.

    Tighten:  Tighten the bolts to 85 N.m (63 lb ft).

  4. Fig 1: Installing Tow Hook (25/35 Series)
    GM349063Courtesy of GENERAL MOTORS CORP.