Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the frame brace to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts retaining the frame brace to the frame.
Tighten: Tighten the frame brace retaining bolts to 50 N.m (37 lb ft).

Fig 1: Installing Frame Brace

Courtesy of GENERAL MOTORS CORP.

Lower the vehicle.