LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Frame & Underbody) >> Repair Instructions >> Crossmember Replacement - Front Engine (4WD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the differential carrier shield. Refer to Shield Replacement in Front Drive Axle.
  3. Remove the bolts retaining the crossmember to the frame.
    4. Fig 1: Removing Crossmember Bolts (4WD)
    GM1380502Courtesy of GENERAL MOTORS CORP.
  4. Remove the crossmember from the vehicle.
    5. Fig 2: Removing Crossmember (4WD)
    GM1380505Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals