LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Frame & Underbody) >> Repair Instructions >> Crossmember Replacement - Front Engine (2WD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
  2. Remove the engine crossmember bolts.
  3. Fig 1: Removing Engine Crossmember Bolts (2WD)
    GM1380495Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine crossmember.
    Fig 2: Removing Engine Crossmember (2WD)
    GM1380497Courtesy of GENERAL MOTORS CORP.