LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1010 (General Information) >> Introduction >> Lifting and Jacking the Vehicle >> Jacking >> Under the Frame Rails

Under the Frame Rails

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Frame Rail Jacking Point
GM630833Courtesy of GENERAL MOTORS CORP.
IMPORTANT: The floor jack pad must not contact rocker panel or the floor pan.

Position the floor jack pad under the frame rail pad.

scientia non olet · About LEMON Manuals