LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Engine Control System Self-Diagnostics - 3.4L) >> Diagnostic Tests >> DTC P0300-P0306: Engine Misfire Detected >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, 2002 Chevrolet Monte Carlo, and 2002 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) uses information from the Ignition Control (IC) module and the Camshaft Position (CMP) sensor in order to determine when an engine misfire is occurring. By monitoring the variations in the crankshaft rotation speed for each cylinder the PCM is able to detect individual misfire events. A misfire rate that is high enough can cause the Three-Way Catalytic (TWC) converter to overheat under certain conditions. The Malfunction Indicator Light (MIL) will flash ON and OFF when the conditions for TWC converter overheating are present.