LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1009 (Wiper System & Washer System) >> Repair Instructions >> Washer Pump/Reservoir Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery and battery tray from the vehicle. Refer to Battery Tray Replacement in Engine Electrical.
  2. Remove the inner wheel housing from the vehicle. Refer to Wheelhouse Panel Replacement in Body Front End.
  3. Disconnect the electrical connector from the washer pump.
  4. Disconnect the electrical connector from the washer solvent level sensor.
  5. Disconnect the washer hose from the washer pump.
  6. Remove the upper bolt from the washer solvent container.
  7. Fig 1: Washer Solvent Container
    GM346934Courtesy of GENERAL MOTORS CORP.
  8. Remove the lower bolts from the washer solvent container.
  9. Remove the washer solvent container from the vehicle.
  10. Fig 2: Removing Washer Solvent Container
    GM346938Courtesy of GENERAL MOTORS CORP.