LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1008 (Heating, Ventilation And Air Conditioning - Gas) >> Repair Instructions >> Recirculation Door Replacement (Delphi) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the recirculation door.
    Fig 1: Recirculation Actuator And Door (Delphi)
    GM391381Courtesy of GENERAL MOTORS CORP.
  2. Install the recirculation actuator.
    3. Fig 2: Recirculation Actuator Mounting Screws (Delphi)
    GM363769Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the recirculation actuator mounting screws.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

    4. Fig 3: Identifying Electrical Connectors
    GM372310Courtesy of GENERAL MOTORS CORP.
  4. Connect the recirculation actuator electrical connection (1).
  5. Install the HVAC module assembly. Refer toHVAC Module Assembly Replacement .
scientia non olet · About LEMON Manuals