LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1006 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Rear Bumper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bumper. Refer to Bumper Replacement - Rear  .
  2. Remove the side molding push-pins.
  3. Release the step pad from the bumper by prying up on the step pad.
  4. Remove the step pad.
    5. Fig 1: Removing Step Pad
    GM347053Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals