LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1006 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Rear Bumper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the step pad to the bumper by pushing down on the clips.
  2. Insert the side molding push-pins.
    3. Fig 1: Installing Step Pad
    GM347053Courtesy of GENERAL MOTORS CORP.
  3. Install the bumper. Refer to Bumper Replacement - Rear  .
scientia non olet · About LEMON Manuals