LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1005 (Exterior Trim) >> Repair Instructions >> Wheel Opening Flare Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the push pins from the wheel opening flare.
  2. Starting from one end of the flare remove the wheel opening flare from the front fender.
    3. Fig 1: Removing Rear Wheel Opening Flare
    GM348521Courtesy of GENERAL MOTORS CORP.
  3. Clean the area in order to remove any dirt or adhesive from the fender.
scientia non olet · About LEMON Manuals