LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1003 (Engine Cooling System) >> Repair Instructions >> Water Pump Outlet Pipe Replacement (6.6L (LB7) Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new O-ring seal on the water pump outlet pipe.
  2. Lightly lubricate the O-ring seal with engine oil.
  3. Install the oil cooler inlet/water pump outlet pipe in the engine oil cooler.
  4. Install a NEW oil cooler inlet pipe to water pump gasket.
    5. Fig 1: View Of Water Pump Outlet Pipe (6.6L (LB7))
    GM699336Courtesy of GENERAL MOTORS CORP.
  5. Install the water pump. Refer to Water Pump Replacement (6.6L (LB7) Engine) .
scientia non olet · About LEMON Manuals