LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1003 (Engine Cooling System) >> Repair Instructions >> Surge Tank Hose/Pipe Replacement - Inlet >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Draining and Filling Cooling System (with HP2)  or Draining and Filling Cooling System (without HP2) .
  2. Reposition the surge tank inlet hose clamp from the radiator.
  3. Remove the surge tank inlet hose from the radiator.
    4. Fig 1: View Of Surge Tank Inlet Hose & Radiator
    GM404039Courtesy of GENERAL MOTORS CORP.
  4. Reposition the surge tank inlet hose clamp from the surge tank.
  5. Remove the surge tank inlet hose (1) from the surge tank.
    6. Fig 2: View Of Surge Tank Outlet Hose & Surge Tank
    GM659059Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals