LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1003 (Engine Cooling System) >> Repair Instructions >> Radiator Vent Inlet Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the vent inlet hose to the surge tank.
  2. Reposition the vent inlet hose clamp to the surge tank.
  3. Install the vent inlet hose to the radiator.
  4. Reposition the vent inlet hose clamp to the radiator.
    5. Fig 1: View Of Surge Tank & Inlet Hose
    GM721988Courtesy of GENERAL MOTORS CORP.
  5. Fill the cooling system. Refer to Draining and Filling Cooling System (with HP2)  or Draining and Filling Cooling System (without HP2) .
scientia non olet · About LEMON Manuals