Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the inlet hose to the water crossover.
Position the inlet hose clamp at the water crossover.

Fig 1: View Of Inlet Hose Clamp & Water Crossover

Courtesy of GENERAL MOTORS CORP.

Install the inlet hose to the radiator.
Position the inlet hose clamp at the radiator.

Fig 2: View Of Inlet Hose & Radiator (8.1L)

Courtesy of GENERAL MOTORS CORP.

Fill the cooling system. Refer to Draining and Filling Cooling System (without HP2) .