LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1003 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Quick Connect Fitting >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a bent-tip screwdriver or equivalent, pull on one of the open ends of the retaining ring in order to rotate the retaining ring.
  2. Rotate the retaining ring (3) around the quick connector until the retaining ring is out of position and can be completely removed.
  3. Remove the radiator outlet hose (2) from the quick connector fitting at the radiator (1).
    4. Fig 1: Radiator Outlet Hose To The Radiator
    GM1275812Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals