LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1003 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Cord Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the coolant heater electrical connector (2).
    3. Fig 1: Identifying Coolant Heater Cord & Electrical Connector
    GM661139Courtesy of GENERAL MOTORS CORP.
  3. Remove the coolant heater cord retainer and bolts.
  4. Remove the coolant heater cord.
    5. Fig 2: View Of Coolant Heater Cord, Retainer & Bolts
    GM661277Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals