Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the coolant air bleed hose (1) to the pipe (2).

Fig 1: Coolant Air Bleed Hose & Pipe

Courtesy of GENERAL MOTORS CORP.

Position the coolant air bleed hose clamp at the pipe.
Install the coolant air bleed hose to the throttle body.
Position the coolant air bleed hose clamp at the throttle body.

Fig 2: View Of Coolant Air Bleed Hose & Throttle Body

Courtesy of GENERAL MOTORS CORP.

Add engine coolant, if necessary.