LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Body Front End) >> Repair Instructions >> Seal Replacement - Hood Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Pull up on the rear hood seal and remove from the cowl pinch-weld flange.

Fig 1: Rear Hood Seal
GM311556Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals