LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Body Front End) >> Repair Instructions >> Hood Hinge Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the hinge to the hood bolts.

    Tighten:  Tighten the hinge to the hood bolts to 25 N.m (18 lb ft).

    Fig 1: Hood Hinge & Bolts
    GM385498Courtesy of GENERAL MOTORS CORP.
  2. Remove the hood support and lower hood.
scientia non olet · About LEMON Manuals