LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Body Front End) >> Repair Instructions >> Air Inlet Grille Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.
  2. Pull up in order to release the outboard air inlet grille panel clips.
    3. Fig 1: View Of Cowl Vent Grille Panel Outboard Section
    GM334315Courtesy of GENERAL MOTORS CORP.
  3. Remove the attaching clips running along the edges of the center air inlet grille panel.
  4. Remove the sheet metal screws on each end of the air inlet grille panel.
    5. Fig 2: Air Inlet Grille Panel & Clips
    GM348546Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the windshield washer hose from the nozzle underneath the center air inlet grille panel.
  6. Remove the air inlet grille panel.
scientia non olet · About LEMON Manuals