DTC P0446: EVAP Vent System Performance: Description
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 Pontiac Grand Prix, 2002 Pontiac Bonneville, 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, and 2002 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
This DTC tests Evaporative (EVAP) emission system for a restricted or blocked EVAP vent path. Powertrain Control Module (PCM) commands EVAP canister purge valve on and EVAP canister vent valve on. This allows a vacuum to be applied to EVAP system. Once a calibrated vacuum level has been reached, PCM commands EVAP canister purge valve off and EVAP canister vent valve off. PCM monitors Fuel Tank Pressure (FTP) sensor for a decrease in vacuum. DTC sets when vacuum does not decrease to about zero in. H2O in a calibrated time.
For the relationship between the on and off states, and the open or closed states of the EVAP canister purge and vent valves, see EVAP VALVE LOGIC table under DTC P0440: EVAP SYSTEM.