LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Wheel Alignment Specifications & Adjustment Procedures) >> Wheel Alignment Procedures >> Camber & Caster Adjustment >> "C" & "K" Series - New Style (Camber Adjustment)

"C" & "K" Series - New Style (Camber Adjustment)

WARNING: This page does not describe the selected car, but rather 47 other vehicles, including the 2001 Pontiac Montana, 2001 Pontiac Aztek, 2001 Oldsmobile Silhouette, 2001 Oldsmobile Bravada, and 2001 GMC Sonoma. However, it is still accessible from the selected car via links, so may be relevant.

If camber is not within specification, remove and discard pinned adjusting cam inserts. Loosen upper control arm adjusting cam nuts. Rotate cam bolts until camber is within specification. See WHEEL ALIGNMENT SPECIFICATIONS  table. Tighten nuts to specification. See TORQUE SPECIFICATIONS  . See Figure .

scientia non olet · About LEMON Manuals