"B" Series (Rear Camber)

WARNING: This page does not describe the selected car, but rather 47 other vehicles, including the 2001 Pontiac Montana, 2001 Pontiac Aztek, 2001 Oldsmobile Silhouette, 2001 Oldsmobile Bravada, and 2001 GMC Sonoma. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Rear camber is adjustable on 4WD models only.

Raise and support vehicle. Remove rear wheel. Loosen rear lower control arm mounting bolts. Loosen rear lower control arm front cam bolt. Reinstall wheel. Adjust camber to specification. See WHEEL ALIGNMENT SPECIFICATIONS table. Tighten bolts to specification. See TORQUE SPECIFICATIONS table.