LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Linings(Rear Disc Brakes) >> Installation

Linings(Rear Disc Brakes): Installation

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 1998 Pontiac Trans Sport, 1998 Oldsmobile Silhouette, 1998 Oldsmobile Bravada, 1998 GMC Yukon, and 1998 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inboard lining and anti-rattle spring. Install outboard lining.
  2. Install caliper assembly.
    NOTE: Make sure the brake hose is not twisted or kinked after installation or damage to the hose could result.
    WARNING: Before moving the vehicle, pump the brake pedal several times to make sure it is firm. Do not move vehicle until a firm pedal is obtained. Check the brake fluid level in the master cylinder after pumping the brakes.
scientia non olet · About LEMON Manuals