Conditions For Running DTC

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0200, P0300, P0440, P0442, P0446, P0452, P0453, or P1441 are not set.
The HO2S voltage is between 425-475 mV at engine start-up.
The Intake Air Temperature (IAT) and the Engine Coolant Temperature (ECT) are less than 122°F (50°C), and are within 14.5°F (8°C) of each other at engine start-up.
The ignition 1 signal is between 9-18 volts.
Intrusive tests are not in progress.
The scan tool output controls are not active.