Conditions For Running DTC

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0200, P0300, P0440, P0442, P0446, P0452, P0453, or P1441 are not set.
The engine run time is more than 409 seconds.
The ignition 1 signal is between 9-18 volts.
Intrusive tests are not in progress.
Scan tool output controls are not active.