LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems >> Fuel Injectors >> Removal (2.2L)

Removal (2.2L)

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Remove intake manifold. See INTAKE MANIFOLD .
  2. Disconnect fuel injector harness connectors. Disconnect fuel feed line at fuel rail. See FUEL LINE DISCONNECT FITTINGS .
  3. Remove fuel rail retaining bolts. Remove fuel rail from cylinder head. Remove fuel injector retaining clip(s). See Fig 1. Remove fuel injector(s) from fuel rail. Remove fuel injector "O" rings and discard.
Fig 1: Removing/Installing Fuel Injector (2.2L)
G00156199Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals