LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.3L (On-Vehicle) >> Repair Instructions >> Drive Belt Idler Pulley Replacement - without Air Conditioning >> Removal Procedure

Removal Procedure

  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Remove the belt idler pulley bolt.
  3. Remove the belt idler pulley from the power steering pump mounting bracket.
    Fig 1: Drive Belt Idler Pulley (Without A/C)
    G01660968Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals